Newsroom - Jan 25, 2024

HVTS vs. Twin Wire Arc Spray – What’s the Difference?

high_velocity_thermal_spray

Twin wire arc spray (TWAS) and High Velocity Thermal Spray, HVTS Solution are both thermal spray processes used for applying metal alloy cladding to surfaces, but they differ in terms of technology, bond strength, application speed, cost and maintenance requirements.

 

Key Difference Between HVTS℠ and Twin Wire Arc Spray

1. Operational Differences

HVTS

HVTS employs a proprietary wire feedstock atomized within a supersonic gas stream. This process yields a cladding characterized by a unique blend of high density, low porosity, and strong bonding. Consequently, HVTS is well-suited for applications demanding superior resistance to corrosion and erosion under challenging conditions.

Twin Wire Arc Spray

Twin Wire Arc Spray utilizes regular off the shelf wire feedstock atomized in a low velocity gas stream and propelled onto the substrate. The resulting cladding has high oxide levels, internal stress, low adhesion, porosity and permeability, which is suitable for aluminum/zinc sacrificial coatings.

2. Particle Velocity

HVTS

This process is specifically characterized by the high velocity of the sprayed particles, which contributes to the coating’s high density and adhesion to the substrate. In comparison to TWAS, HVTS can be advantageous in applications where minimizing oxidation and internal stress of the coating material is crucial. The higher velocities in HVTS improves the integrity of the sprayed material and corrosion barrier.

Twin Wire Arc Spray

While the velocity in Twin Wire Arc Spray is high, it is relatively much lower than in HVTS. The spraying process involves the molten material being propelled onto the substrate. Oxidation of molten particles happens extremely fast. This results in highly oxidized coatings.

3. Coating and Cladding Characteristics

HVTS℠

HVTS℠ Claddings are known for their high density, low porosity, and excellent bond strength. These characteristics make HVTS℠ suitable for applications where corrosion protection and wear resistance are critical.

Twin Wire Arc Spray

Twin Wire Arc Spray coatings typically exhibit good adhesion and can provide effective sacrificial protection. However, the density and porosity may vary depending on the specific parameters used in the spraying process. It is extremely hard to create an isolating coating with TWAS.

4. Applications

HVTS℠

HVTS℠ is often used in applications where extreme conditions such as high temperatures, corrosive environments, or abrasive wear are present. Industries like power generation, petrochemical, chemical, metals and mining, and oil and gas often employ HVTS for the protection of critical components and process assets.

Twin Wire Arc Spray

Twin Wire Arc Spray is inexpensive and finds applications in various industries, including automotive, marine, and general manufacturing. It is commonly used for sacrificial external corrosion protection, repair and improving the wear resistance of components.

 

Click here for a comprehensive comparison of IGS (HVTS) versus Twin Wire Arc Spray

Corrosion-Rate-of-High-and-Low-Velocity-Alloy-625-Coatings-vs-Thickness

Key Benefits of HVTS℠ over Twin Wire Arc Spray

1. Reduced Oxidation and Decarburization:

HVTS℠ is advantageous in applications where minimizing oxidation and decarburization of the coating material is crucial. The higher velocities of HVTS maintain the integrity of the sprayed material.

2. Greater Thickness Control

HVTS℠ provides better control over coating thickness. This can be important in applications where precise thickness specifications are required for optimal performance.

3. Wide Range of Materials

HVTS can be used with a variety of coating materials, including metals and alloys. This versatility makes it suitable for a broad range of applications where different material properties are needed.

4. Reduced Heat Input

HVTS℠ can be a lower-heat-input process compared to Twin Wire Arc Spray. This can be beneficial for applications where minimizing substrate heat input is critical, such as when coating temperature-sensitive materials.

5. Efficient Material Usage

HVTS℠ can be more efficient in terms of material usage, as the high velocities allow for better control and optimization of the coating material. This can lead to cost savings in terms of material usage.

 

Conclusion

Ultimately, the decision between HVTS℠ and Twin Wire Arc Spray should be informed by a thorough consideration of the specific demands of the intended application, considering factors such as material requirements, operational conditions, and cost considerations. Both processes offer benefits, allowing industries to tailor their coating solutions to meet the diverse challenges faced.

Comparison Table of IGS (HVTS) versus Twin Wire Arc Spray

High Velocity Thermal Spray

Conveyance Technology

High velocity system

Significant increase in performance (both erosion and corrosion resistance)

Lower porosity of <2%

Less coating stress

Low permeability

Twin Wire Arc Spray

Conveyance Technology

Low velocity system

Higher oxide content for interconnected oxides and increased porosity

Higher porosity of >25%

Greater coating stresses

High permeability

High Velocity Thermal Spray

Typical Alloys

Inconel (Nickel Chrome Moly Tungsten based) for 8x better erosion resistance

Twin Wire Arc Spray

Typical Alloys

TSA, TSZ, Fe-based materials, not erosion resistant

High Velocity Thermal Spray

Hardness

Hardness of up to 1149 HVN100g which is approximately 170% harder than Twin Wire Arc Inconel

Twin Wire Arc Spray

Hardness

Hardness of 425 HVN100g

High Velocity Thermal Spray

Maintenance

Repairability means you can build-up the existing coating without stripping to bare carbon steel due to low coating stresses

Twin Wire Arc Spray

Maintenance

TWAS can also be repaired if required

Bleed through occurs at 30 to 40 mils, requiring coating removal to bare carbon steel before coating

Could you benefit from HVTS?

Contact us for a free technical evaluation

Book a Technical Evaluation